Label and put away
Scan the material, measure the offcut and enter its usable length. Approved rules say whether it is worth keeping and which rack it belongs in. Attach the label and scan the bin to confirm the piece is in place.
OFFCUT REUSE FOR STRAIGHT LENGTHS
RemnantRack keeps a register of the reusable offcuts on your racks: what each piece is, how long it is and exactly where it sits. Search for the length a job needs, reserve a suitable piece and record the cut. Any usable remainder gets its own label and goes back on the rack. Describe your keep and storage rules in plain English, and approved rules decide what is worth keeping, where it goes and which piece to use first.
Free for real production at one station. While SmartFACT is in early access, we set your first workflow up with you.
Approved rules decide what is kept and how pieces are ranked, and cannot reserve, cut or scrap a piece.
For workshops that cut straight lengths, such as aluminium profile, bar or tube, and keep valuable offcuts on racks without a reliable way to find them again.
AUTOMATION FROM PLAIN ENGLISH
Your workshop already knows which offcuts are worth keeping, where long pieces go and which piece to use first. Describe it in plain English. SmartFACT turns it into rules that decide whether a new offcut is kept, reviewed for disposal or quarantined, which rack it goes to, which pieces a job may use and how candidates are ranked. You test the rules against examples and approve them. In the workshop, the rules run as approved, with no AI call when anyone registers, searches for or cuts a piece.
How your rules become automationREMNANTRACK · ILLUSTRATION
A suitable offcut was already on the rack, so no new length was cut. The short remainder goes to disposal review, not back on the rack.
Fictional examples. This illustration does not reserve a piece or print a label.
Change the job to see which offcut it gets.
HOW IT WORKS
A job needs 1,150 mm of a profile. There may be a suitable offcut on the rack, but finding it means measuring, guessing or asking around, so someone cuts a new length instead. Or the piece everyone remembers went into another job last week. RemnantRack gives every reusable piece a label, a measured length and a confirmed place, so the search takes seconds and shows only pieces that are really there.
Scan the material, measure the offcut and enter its usable length. Approved rules say whether it is worth keeping and which rack it belongs in. Attach the label and scan the bin to confirm the piece is in place.
Enter the material and the finished length the job needs. RemnantRack adds the kerf and trim, lists the eligible pieces with their location and spare length, and a reservation stops anyone else taking the one you choose.
Check the piece out at the station, make the cut and record what you used. A usable remainder gets a new identity and label, linked to the piece it came from, ready to go back on the rack.
THE SERVICE
Enter millimetres or inches; both are stored exactly. Measurement uncertainty, kerf, trim and processing allowances appear in every calculation, so the usable length is clear.
Search matches the exact material, profile and any required batch or condition before it looks at length. RemnantRack never offers a substitute material, and no rule can add one.
A reservation shows who holds the piece and for which job. Two people cannot take the same offcut, and an expired reservation is checked against the rack before the piece is offered again.
Each label carries the piece's barcode, material, length and rack. A cut retires the old piece and creates a new label for the remainder; a reprint changes nothing.
Scan a rack section to see which pieces are present, missing or unexpected. Missing pieces stay out of search until they are found or written off.
See each piece's measurements, moves, reservations, corrections and the cut it came from. Export your own data at any time, or connect other systems through the read API and event notifications.
IS IT A FIT?
WORKS WITH
Every SmartFACT product keeps its own records. A link between two products is used only when your organisation has both, and is agreed at onboarding.
How the SmartFACT products work together →BEFORE YOU DECIDE
RemnantRack pays back through the work it removes: hunting the racks with a tape measure for a usable length, adding up kerf, trim and allowances by hand, two people going for the same offcut, and relabelling and updating the register by hand after a cut.
We quote no payback period, because it depends on your own volumes and your people’s time.
SmartFACT is a hosted service. It runs in the UK, with database backups encrypted and copied off-site to the EU. Each product keeps its own database.
Access is through SmartFACT Accounts: your organisation's administrator decides who has access to each product and in which role, and while SmartFACT is in early access we enable the organisation and its first users. Every person signs in with their own account; there are no shared station logins, so every approval, correction and release is attributable to a named person. Single sign-on with your own identity provider is not offered.
Your ERP, MRP or factory software connects to SmartFACT Data only, never to a product directly, and Data then supplies the products. Connecting SAP ECC or S/4HANA, an ERP or MRP system, EDI, or software of your own is paid integration work. We scope it with you, price it before work starts and build it through data.smartfact.ai.
While SmartFACT is in early access, we set up your first workflow with your team and stay close while it runs, so problems are fixed fast. Every paid plan includes support by email and ticket during UK business hours, for configuration, data imports, printing and the questions that come up in the first months.
BEFORE YOU START
Tell us what you cut, how offcuts are stored today and how often a job could use one. While SmartFACT is in early access, we review the fit, enable your organisation through SmartFACT Accounts and set your first rack up with you, free. Submitting the form does not create an account by itself, and no payment is taken.
No. RemnantRack finds and tracks individual offcuts for the job in front of you. It does not nest parts, optimise a cutting list across your stock or send instructions to a saw. If your cutting software already manages offcuts well, it may already do what you need.
Measure the usable straight length and enter it in millimetres or inches, with the measurement uncertainty of your usual method. RemnantRack converts both exactly and never rounds a length to make a match. Kerf, trim and processing allowances come from your policy, can be changed for each job and are shown in every search.
A reservation. Only one person can hold a piece at a time, and the reservation shows their name, the job and when it expires. Taking the piece from the rack needs a checkout at the station against that reservation, so the same offcut cannot go to two jobs.
RemnantRack makes the right offcut quick to find: enter the material and the length the job needs, and it lists the pieces long enough once kerf, trim and measurement uncertainty are allowed for, with their rack and bin, in the order your policy sets. A piece a supervisor marks missing after a rack check stays out of search until it is found or written off. RemnantRack does not control the saw, so cutting into new stock stays a person’s decision.
Record the cut and measure what is left. A usable remainder gets a new identity and label, linked to the piece it came from, and becomes available once it is put away and its bin scanned. The original piece is retired, so the two cannot both appear in a search.
A browser station near the racks, a barcode scanner that types like a keyboard, rack and bin cards, and label stock that stays on your material. On a phone or tablet, the camera button on each scan field reads the labels and cards too. Labels print as 100 × 150 mm PDFs, directly or through SmartFACT PrintStation. Label adhesion and scanning are checked on your real material when the first rack is set up. If the connection drops before a station command is answered, the station says it is not known whether it was recorded, and not to move, cut or relabel the piece until it is confirmed; Check again sends the same command and never records it twice, as the Help article at https://help.smartfact.ai/manuals/remnantrack/connection-and-scanning explains. Set-up guides for scanners and label printers, each written from the maker’s own documents, are at https://help.smartfact.ai/manuals/hardware.
No. AI helps turn your plain English rules into precise conditions during setup. Your team tests and approves them. In the workshop, RemnantRack applies the rules as approved, without calling an AI model. A rule cannot certify a grade, measure a piece, approve a substitute material or authorise a cut.
Yes. RemnantRack includes a sample workshop with fictional materials, racks and offcuts, so your team can practise registering, finding and cutting pieces. It prints nothing and sends nothing to your systems.
Nothing to start: the free tier covers one rack at one station. You pay when your use passes its thresholds, or when you want support or development. There is no charge per piece, cut or label.
IN MORE DETAIL
Offcut tracking means measuring, labelling and racking each reusable piece so you can find it again. See how RemnantRack does it for straight lengths.
02An offcut is worth keeping when it is long enough to be used again. See how RemnantRack’s approved rules keep, store and offer each piece.
03Finding an offcut before cutting new stock means using a leftover piece whenever one is long enough. See how RemnantRack searches your racks with kerf and trim.
04Organising offcut storage means a label for every reusable piece, a numbered rack and bin, and rack checks. See how RemnantRack keeps racks and register in step.
FREE TIER
Tell us what you cut, how offcuts are stored today and how often a job could use one. We review the fit and help you set up your first rack.
Free at one station. Set up with you while SmartFACT is in early access.
THE SMARTFACT SUITE
Automate factory decisions with rules you describe in plain English. Explore focused SmartFACT services, plus free tools for everyday checks. The free tools need no account.
See the text and key events your keyboard scanner sends. Compare them with the value you expected.
Test a scannerPrint a known PDF, measure its reference marks and compare scans from the printed codes.
Check a printCreate 100 × 50 mm bin and rack cards with Code 128 or QR, from one record or a CSV.
Make bin cardsCount stock by location with a barcode scanner, compare it with a stock file and export the results.
Start a free countSee exactly what a scanned barcode contains, with hidden characters shown and GS1 fields, check digits and dates explained.
Inspect a barcodeScan a reference and each label, see an exact match or the first difference, and download the results.
Start a free comparisonScan an item or location, note what needs attention, print a review tag and keep a review list.
Make a free tagLoad your own parts and locations CSV, scan a code and see every location it lists.
Start a free lookupCheck cartons, pallets or serial numbers against a list with a phone or scanner and see what is missing.
Start a free checkCheck CSV and JSON files exactly as written, preview a column mapping and compare two versions by key.
Check a file freeTime work cycles and changeovers on a phone, record interruptions with reasons and download the results.
Start a free studyLabel the offcuts on your rack, find a piece long enough before cutting new stock and record what you used.
Track offcuts freeLoad one or two CSV exports and follow a lot or serial forwards or backwards, with the row behind every link.
Start a free traceRecord the parts recovered from each return, label them with a QR code, check them and record the unit each one goes into.
Track recovered parts freeDescribe label rules in plain English. Automatically select layouts, resolve customer codes and check each job before printing.
Explore LabelRulesTurn plain English component rules into automatic kit checklists, then check scans against the expected parts and quantities.
Explore KitProofTurn plain English rules into automatic step selection for each unit, with required evidence and a record of completed work.
Explore WorkStepsApply approved product rules and calculations automatically to turn dimensions and options into manufacturing requirements.
Explore FactorySpecMaintain reference tables with ConfigSheets or bring shop orders into SmartFACT through reviewed connectors. Check changes and deliver data to the products that use it.
Explore SmartFACT DataTurn plain English rules into automatic order checks and destination selection, with controlled production release.
Explore OrderRunScan the work order and the parcel choice to book the courier and print the labels. Approved plain English rules recommend or choose the parcel.
Explore ParcelOfficeScan an empty container to send the right refill request to stores. Approved plain English rules set the stores queue, priority, ticket printer and escalation.
Explore RefillFlowLabel each offcut, find a suitable length before cutting new stock and record what you used. Approved plain English rules decide what to keep and where it goes.
Start freeCheck a shared tool before handover, record who has it and keep damaged or overdue tools out of the next issue. Start free with one crib.
Explore ToolCustodyReceive, put away, reserve and issue stores material with barcode checks, keeping held, reserved and available stock apart. Start free with one stockroom.
Explore StoresFlowFollow a lot or serial number through the records your factory already keeps, with the source of each link and the gaps shown. Start free with two declared sources.
Explore LotTrailScan an identified unit to get its approved final-inspection checks, then record exact readings with their result, holds and release history.
Explore CheckStationBook returned units in, recover and label the usable parts, release them independently and record the unit each goes into. Start free with one product family.
Explore ReclaimStationGenerate GUIDs, UUID v4 and v7, ULIDs and Nano IDs, format and download batches, or inspect a UUID in your browser.
Generate identifiersInspect and edit text, hex, Base64 and binary bytes in your browser, reveal hidden characters and compare byte sequences.
Inspect some bytesTest JavaScript regular expressions in your browser, inspect matches and captures, preview replacements and check expected cases.
Test a patternCollect purchase requests, approve supplier orders and track what is still to arrive. Start free at one site.
Explore PurchasingDescribe, test, approve and audit the automation rules of every SmartFACT product in one place. Included with each product’s paid plan, or on its own.
Explore AutomationStep-by-step guides and interactive demonstrations for the SmartFACT suite. Read the instructions, watch a task or practise with real product screens and sample data.
Open SmartFACT Help